Capacity : |
120 combipack blisters per minute. |
Collation : |
5 to 15 combipacks |
Speed Synchronization : |
Auto |
Conveyor Width : |
300 mm |
Change Over Tools : |
Minimum. |
Process Control : |
The Collator is in standby mode at power on. It starts running automatically when blister packing machine starts running. |
Machine Interlock |
Low air pressure, conveyor jam. |
Operation |
Only Auto mode |
Power Failure : |
The Collator runs on battery backed up ram. In case of a power failure, it runs through a power recovery sequence, i.e. battery backed up values / parameters are reloaded into the program. |
Emergency Stop : |
A normal stop switch is provided to the operator on the panel. |
Critical faults : |
They will be indicated on the PLC by glowing of corresponding LED`s. |
Data and Security : |
The program is secured by 2 levels of passwords. Production related data is available in the PLC, it may be collected through the RS 232 port. Compatible software will have to be developed by you. |
Display : |
6 digit 7 segment display + 16 status LED`s + 16 action LED`s |
Intervention : |
Is provided at certain points in the program. |
Data Erasing : |
Has to be done manually. |
RS232 port |
Available |
Environment : |
The machine is suitable for use between 15 to 40 degree centigrade and RH between 30 to 70%. |
PLC : |
We are using our own microprocessor based controller. |
|
|
NOTE : |
Any feature / facility not specifically mentioned above is not available in our standard model. |
|
|